What checks should be carried out before operating a spring machine?
2019-08-06
What are the necessary inspection items for the operation of a spring machine?
Spring machine users must be familiar with the structural performance of each component of the equipment, each solenoid valve, limit switch, and the function of each button and indicator light on the control panel, as well as the machine's work cycle. The machine must not be used beyond its performance capabilities.
New machines or machines after major repairs must undergo running-in maintenance during the running-in period. For example, during the specified running-in period of a universal spring machine, the load and speed should be increased gradually according to the relevant regulations, and lubrication and fastening conditions should be comprehensively checked. The condition of each part of the machine should be observed, and any abnormalities should be resolved promptly. The focus of running-in maintenance is to replace the lubricating oil in various parts, lubricate various parts, and tighten various bolts.
When the system is powered on, it should be run empty for half an hour to allow the system to stabilize before putting it into formal operation. Set the switch to the idle position and check if the running light is on. If there is a problem, troubleshooting must be completed before starting the machine.
The upgrading and replacement of spring machines is a necessity for many enterprises. Many spring machine manufacturers are still using relatively old mechanical equipment for production, resulting in low efficiency and inability to keep up with product quality.
Previous page:
Tel:
E-Mail:
ADD:
Fujisource Industrial Park, Building D, Sandong Town, Huizhou City, Guangdong Province
Power by：www.300.cn | SEO | Privacy Policy